Bobcat · Electrical
Bobcat code M5107: Rear light output open circuit
What it means
The controller sees an open circuit in the rear light output.
Can I keep running?
Keep going carefully, fix soonUsually, if the machine runs normally: finish the job carefully and fix it soon. Stop if the machine derates, overheats, loses power or the code comes with an alarm.
Check first
- Park on level ground, lower the lift arms and attachment to the ground, stop the engine and remove the key.
- Check the rear lights and replace any failed lamp.
- Inspect the connector and wiring at the rear light.
- Restart and see if the code comes back. If it does, stop and call your Bobcat dealer.
Likely causes
- Burned-out rear light
- Unplugged or corroded light connector
- Broken wire
The fix
A new lamp or a repaired connector fixes it. Don't work in the dark without working rear lights.
Different code on your screen? Snap the display and Mechy reads it.
Questions
What does Bobcat code M5107 mean?
Rear light output open circuit. The controller sees an open circuit in the rear light output.
Can I keep running with M5107?
Usually, if the machine runs normally: finish the job carefully and fix it soon. Stop if the machine derates, overheats, loses power or the code comes with an alarm.
How do I fix Bobcat code M5107?
A new lamp or a repaired connector fixes it. Don't work in the dark without working rear lights.
Sources
Code meanings vary by model, serial range and software. Confirm with your operator's manual or Bobcat dealer before replacing parts.
Snap the display and Mechy reads the code
Take a photo of the screen and the machine, say what it is doing, and get the checks and the fix as steps with moving drawings.
First guide free. No sign-up, no card.