Fault codes
Kubota fault codes
Kubota tractors and track loaders with common-rail diesel engines light a warning lamp and show a code on the dash. Engine codes start with P (such as P0336), tractor system codes show as E-93 and similar, and SVL/SSV track loaders show E:9xxx codes. Clearing the warning on the panel doesn't erase the code stored in the engine ECU, so a fault that's still there comes back.
Stop fix before running Fix soon careful Info OK to run
| Meaning | |||
|---|---|---|---|
| P0606 | ECU processor or memory fault | Electrical | Fix soon |
| P0336 | Crankshaft position sensor abnormality | Engine | Fix soon |
| P0093 | Fuel leak in high-pressure system | Fuel | Stop |
| E9000 | DPF regeneration needed (engine rpm too low) | Engine | Fix soon |
| E9302 | Engine fuel system leakage | Fuel | Stop |
| E9310 | Starter turn-on limited | Electrical | Stop |
| E9006 | DPF regeneration blocked by inhibit switch | Engine | Fix soon |
| E-93 | Starter relay trouble | Electrical | Fix soon |
| E9120 | Fuel filter water warning | Fuel | Stop |
| E9400 | Other failures | Engine | Stop |
| P0563 | Battery voltage too high | Electrical | Stop |
No code matches. Check the letters: codes use a zero, not the letter O. Or snap the display.
By system
Electrical
- P0606 ECU processor or memory fault
- E9310 Starter turn-on limited
- E-93 Starter relay trouble
- P0563 Battery voltage too high
Engine
- P0336 Crankshaft position sensor abnormality
- E9000 DPF regeneration needed (engine rpm too low)
- E9006 DPF regeneration blocked by inhibit switch
- E9400 Other failures
Fuel
Snap the display, skip the table
Take a photo of your Kubota display and say what the machine is doing. Mechy reads the code and makes the steps to fix it.
First guide free. No sign-up, no card.