Kubota · Engine
Kubota code E9006: DPF regeneration blocked by inhibit switch
What it means
On Kubota SVL/SSV track loaders, E:9006 means the DPF needs regenerating, but the regeneration inhibit switch is on, so regeneration can't start.
Can I keep running?
Keep going carefully, fix soonUsually, if the machine runs normally: finish the job carefully and fix it soon. Stop if the machine derates, overheats, loses power or the code comes with an alarm.
Check first
- Move the machine to a safe spot away from people, buildings and anything flammable.
- Release the regeneration inhibit switch so regeneration can run.
- If the code doesn't clear, call your dealer.
Likely causes
- Regeneration inhibit switch left on
The fix
Releasing the inhibit switch lets regeneration run and clears it. Only inhibit regeneration when you need to, such as near flammable material.
Different code on your screen? Snap the display and Mechy reads it.
Questions
What does Kubota code E9006 mean?
DPF regeneration blocked by inhibit switch. On Kubota SVL/SSV track loaders, E:9006 means the DPF needs regenerating, but the regeneration inhibit switch is on, so regeneration can't start.
Can I keep running with E9006?
Usually, if the machine runs normally: finish the job carefully and fix it soon. Stop if the machine derates, overheats, loses power or the code comes with an alarm.
How do I fix Kubota code E9006?
Releasing the inhibit switch lets regeneration run and clears it. Only inhibit regeneration when you need to, such as near flammable material.
Sources
Code meanings vary by model, serial range and software. Confirm with your operator's manual or Kubota dealer before replacing parts.
Snap the display and Mechy reads the code
Take a photo of the screen and the machine, say what it is doing, and get the checks and the fix as steps with moving drawings.
First guide free. No sign-up, no card.