Bobcat · Electrical
Bobcat code M6302: Tailgate fan 2 error ON
What it means
The controller sees the output for tailgate fan 2 on when it should be off.
Can I keep running?
Keep going carefully, fix soonUsually, if the machine runs normally: finish the job carefully and fix it soon. Stop if the machine derates, overheats, loses power or the code comes with an alarm.
Check first
- Park on level ground, lower the lift arms and attachment to the ground, stop the engine and remove the key.
- Check the fuses and relays for that circuit using the fuse decal or the O&M manual.
- Inspect the fan wiring and connectors at the rear door for damage or water.
- Restart and see if the code comes back. If it does, stop and call your Bobcat dealer.
Likely causes
- Fan relay stuck on
- Short to battery voltage in the fan wiring
- Water in a connector
The fix
A relay or wiring repair is the usual fix. Call your dealer if the code persists.
Different code on your screen? Snap the display and Mechy reads it.
Questions
What does Bobcat code M6302 mean?
Tailgate fan 2 error ON. The controller sees the output for tailgate fan 2 on when it should be off.
Can I keep running with M6302?
Usually, if the machine runs normally: finish the job carefully and fix it soon. Stop if the machine derates, overheats, loses power or the code comes with an alarm.
How do I fix Bobcat code M6302?
A relay or wiring repair is the usual fix. Call your dealer if the code persists.
Sources
Code meanings vary by model, serial range and software. Confirm with your operator's manual or Bobcat dealer before replacing parts.
Snap the display and Mechy reads the code
Take a photo of the screen and the machine, say what it is doing, and get the checks and the fix as steps with moving drawings.
First guide free. No sign-up, no card.