Bobcat · Hydraulic
Bobcat code M1732: Hydraulic lock valve overcurrent
What it means
The controller sees too much current in the hydraulic lock valve solenoid circuit. This valve locks out loader hydraulic functions.
Can I keep running?
Stop: fix before runningNo. Stop the machine safely (bucket or attachment down, engine off) and find the cause before you run it again.
Check first
- Park on level ground, lower the lift arms and attachment to the ground, stop the engine and remove the key.
- Inspect the lock valve connector and wiring you can see for damage or water.
- Restart and see if the code comes back. If it does, stop and call your Bobcat dealer.
- Do not bypass or modify the seat bar, BICS interlocks or parking brake to keep working.
Likely causes
- Shorted solenoid coil
- Damaged or pinched wiring
- Water in the connector
The fix
Usually the solenoid coil or wiring is replaced. Lift and tilt may lock out or not lock out as they should, so have a dealer fix it before you operate.
Different code on your screen? Snap the display and Mechy reads it.
Questions
What does Bobcat code M1732 mean?
Hydraulic lock valve overcurrent. The controller sees too much current in the hydraulic lock valve solenoid circuit. This valve locks out loader hydraulic functions.
Can I keep running with M1732?
No. Stop the machine safely (bucket or attachment down, engine off) and find the cause before you run it again.
How do I fix Bobcat code M1732?
Usually the solenoid coil or wiring is replaced. Lift and tilt may lock out or not lock out as they should, so have a dealer fix it before you operate.
Sources
Code meanings vary by model, serial range and software. Confirm with your operator's manual or Bobcat dealer before replacing parts.
Snap the display and Mechy reads the code
Take a photo of the screen and the machine, say what it is doing, and get the checks and the fix as steps with moving drawings.
First guide free. No sign-up, no card.