Bobcat · Hydraulic
Bobcat code M0217: Hydraulic/hydrostatic filter plugged
What it means
The hydraulic/hydrostatic filter is restricted and needs service.
Can I keep running?
Stop: fix before runningNo. Stop the machine safely (bucket or attachment down, engine off) and find the cause before you run it again.
Check first
- Park on level ground, lower the lift arms and attachment to the ground, stop the engine and remove the key.
- Let the machine cool and relieve hydraulic pressure as the O&M manual describes before touching any hose or fitting.
- Check the service record and replace the hydraulic/hydrostatic filter as the O&M manual shows.
- Check the fluid level after the change and look for leaks at the filter.
- Restart and see if the code comes back. If it does, stop and call your Bobcat dealer.
Likely causes
- Filter at or past its service life
- Contaminated hydraulic fluid
- Faulty filter switch or wiring
The fix
A new filter fixes most cases. If a new filter plugs quickly, have the fluid tested for contamination. Running on a plugged filter risks hydraulic damage.
Different code on your screen? Snap the display and Mechy reads it.
Questions
What does Bobcat code M0217 mean?
Hydraulic/hydrostatic filter plugged. The hydraulic/hydrostatic filter is restricted and needs service.
Can I keep running with M0217?
No. Stop the machine safely (bucket or attachment down, engine off) and find the cause before you run it again.
How do I fix Bobcat code M0217?
A new filter fixes most cases. If a new filter plugs quickly, have the fluid tested for contamination. Running on a plugged filter risks hydraulic damage.
Sources
Code meanings vary by model, serial range and software. Confirm with your operator's manual or Bobcat dealer before replacing parts.
Snap the display and Mechy reads the code
Take a photo of the screen and the machine, say what it is doing, and get the checks and the fix as steps with moving drawings.
First guide free. No sign-up, no card.